MV Series Godwin CD150MV

Overview Performance Curves Solutions Documentation & Tools

Available for Rent


Product Features
  • ​Liquid bath mechanical seal for dry-running and reduced maintenance costs
  • Abrasion-resistant silicon carbide seal faces for trouble-free performance
  • Diesel engine or electric motor driven
  • Sound attenuated enclosure available​
  • Emissions compliant engines available ​

Wellpoint Dewatering Pump

The Godwin CD150MV wellpoint pump offers flow rates up to 1,750 US GPM (397 m³/hr), total heads to 140 ft (43 m), solids handling up to 3-1/8 in (3.1 mm) in diameter and air handling capabilities to 120 cfm.

Each pumpset includes a centrifugal, single-stage, end suction pump with high-volume, belt-driven vacuum pump and single-action, float air/water separation tank. Additional features include hardened wearparts and a dry-running liquid-bath mechanical seal.

Wellpointing dewatering system

Godwin wellpoint pumps, by Xylem, are used specifically for pumping water out of the ground before and during excavation. When the water level below ground is higher than the excavation, the water level must be lowered to have a dry hole when excavating. 

Self-jetting Godwin wellpoint pumps and header pipe complete a system that's easy to transport and set up. With up to 20° deflection at header coupling joints, the pipes easily conform to site and ground conditions without loss of suction or pressure integrity.

Performance Curves

Performance Curves

Model 6


Recommended Solutions

Documentation & Tools