Jabsco Lite Flush marine toilet

Designed to instantly retrofit your existing Jabsco manual toilet, the Lite Flush uses all your existing pipework and mounting bolts – all you need to add is power.

The Jabsco Lite Flush marine toilet offers both low power and water consumption with an integral rinse and waste pump system. This compact and lightweight unit will give your bathroom quiet and efficient flushing performance and a modern, stylish look. The Lite Flush Toilet is available with either a foot switch (left or right fitted) or a wall-mounted control panel.

Foot Switch 

The Lite Flush electric marine toilet is available with either a foot switch or a control panel. For the footswitch variant, simply press down once to fill the bowl, and press again to flush.

Control Panel

The one touch 'press and release' switch pad is sealed for life, with a 10-foot (3-meter) link cable, fitted quick connector, and heat shrink seal. The control panel variant offers a multi-function one-touch pad offering four options: fill, quick flush, flush, or empty.

Flush Pump

The flush pump is an internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 or 24 Vdc, permanent magnet motor with ball bearings and robust ceramic seal. It discharges up to 5ft (1.5m) above the base of the toilet.

Rinse Pump 

The rinse pump is a Jabsco diaphragm water pump, that is self-priming up to 3m (10ft), dry running, and driven by 12 or 24 Vdc, permanent magnet, ball bearing motor.

Ports

The raw water rinse pump inlet has ¾ inch (19mm) hose tails. The flush pump discharge has a 1½ inch (38mm) hose tail.

Model Numbers

• 58500-0012
• 58500-0024
• 58500-1012
• 58500-1024