The WTW MIQ/TC 2020 3G Controller is part of a digital and modular network system for wastewater treatment plant monitoring, allowing for the measurement of up to 20 parameters. This completely modular plug-and-play system allows you to monitor and control the process in your wastewater facility continuously and accurately.
Digital and modular network system for wastewater treatment plant monitoring to connect up to 20 sensors.
The heart of every IQ SENSOR NET system 2020 – multi-parameter system for up to 20 sensors with USB interface, remote maintenance and remote communication:
The high-performance processor of the terminal/controller MIQ/TC 2020 3G coordinates all tasks inside the network. The USB interface allows quick data exchange via USB stick or directly to external systems. The system status LED provides reliable and quick information about the function and the system status.
The system stores the measured values of a new connected sensor and all configuration data automatically. The large, colored display and the large buttons ensure a clear and customer friendly operation at any conditions.
When integrating two MIQ/TC 2020 3G into system, the system security and therefore the availability of the total system is ensuredby the controller-redundancy-function. This lets you use one MIQ/TC 2020 3G as a terminal and a controller (fixed installation), and a second one as a mobile terminal. By including this into the network, you can have remote communcation as well as remote maintenance.
For the remote maintenance from a PC, you need to install the software IQ Software Pack CONNECT. This setting can be made via a user interface according to the MIQ/TC 2020 3G terminal. In addition, you have the option to transfer measuring and configuration data of the system to a computer. For the control with the IQ Web Connect the MIQ/MC3 is required.
The MIQ/TC 2020 3G Terminal/Controller is aavailable as different versions. As single Terminal or as pre-configured, ready-to-used starter sets with special prices. Each of these 3 sets consists of a Terminal/Controller (MIQ/TC 2020 3G), a power supply module (MIQ/PS) and an output module with 1) 3 current outputs and 3 relays or 2) 6 relays or 3) an ethernet interface. The latter provides the digital fieldbusses Ethernet/IP, Modbus TCP and PROFINET.