Godwin Heidra Series Godwin Heidra 250

Overview

Product Features

Double mechanical seal (Silicon carbide inboard seal and carbon or ceramic outboard seal) in its own clean oil bath for indefinite dry running
Gear motor connections with standard SAE flange & shaft, which allows easy connection to plug directly into bearing bracket
Open solids handling impellers with replaceable wear plates
Standard impeller design for general pumping, slurries and sludges
Safe pump-end to minimize risk of electric shock or explosion

Hydraulic Submersible Pump

When the suction lift is greater 28 ft (8.5 m), Heidra® pumps take over where Dri-Prime® pumps leave off.

The Godwin Heidra 250 hydraulic submersible pump is an extremely powerful, yet compact pump with flow capabilities up to 2,853 US GPM (648 m³/hr) and discharge heads up to 128 ft (39 m).

It has the ability to handle solids up to 3 in (75 mm) in diameter. With a liquid bath mechanical seal, the pump has dry running capabilities making it ideal for high volume sewage bypass applications where suction lift is greater than 28 ft (8.5 m).

It's a hydraulic submersible pump that's ready to go anywhere.

DIESEL OR ELECTRIC POWER PACKS AVAILABLE

Godwin Heidras come equipped with a diesel engine Power Packs for stand-alone operation, these pumps will work on any site, no matter how remote. Plus, all diesel engines meet the latest emissions regulations.

Our Heidra pumps can also be powered by electric motor Power Packs. Electric Power Packs do not need refueling, the motor requires less servicing, and they reduce the carbon footprint of any project. Available with soft starts and VFDs for variable speed control.

Options:

Diesel or electric drive
Skid mount or highway trailer
Quiet enclosures

Specifications

Pumpend

Model 13

Model 8

Discharge Ø (in) Pumpend

8 " 125# ANSI B16.1

Hydraulic Motor Type

Piston

Hydraulic Motor Disp. (CC)

90.0 CC

Max. Solids Handling (in) Pumpend

3.0"

Discharge Ø [mm] (in) Pumpend

[250] (10)

Max. Solids Handling [mm] (in) Pumpend

[75] (3)

Drive Pressure (bar)

250

Consumed Power [kW] (hp) Pumpend

[15 to 63] (20 to 85)

Diesel Power Pack

Model 13

Model 8

Drive Pressure (PSI) Diesel Power Pack

4000 psi

Hydraulic Pump Type Diesel Power Pack

Piston

Hydraulic Pump Disp. (CC) Diesel Power Pack

100.0 CC

Rating [hp] Diesel Power Pack

155 HP

Standard Mount Diesel Power Pack

Skid

Power Pack Model

GHPU50

Critical / Quiet Enclosure

Model 13

Model 8

Noise Level @ 30' (dBA)

Standard Mount Critical Quiet Enclosure

Skid

dB(A) at 7 m

Electric Power Pack 50 Hz

Model 13

Model 8

Rating [kW] Electric 50 Hz Power Pack

110

Rated Current [A] Electric 50 Hz Power Pack

191

Voltage [V/phase] Electric 50 Hz Power Pack

400/3~

Accessories

VFD

Optimize system performance
Increase efficiency
Automatic start and stop with switch, transducer and SCADA remote signal
Protects against over current and temperature
Protects against short circuit, under voltage and phase loss
Available for all electric driven Godwin Dri-Prime and Heidra pumps

Godwin PrimeGuard 2 Controller

State-of-the-art, touch sensing digital controller
Manual, automatic, or remote starting capabilities
Security levels allow limited to full access of controller functionality
Capable of auto-throttling engine rpm in response to changing pressure/level/flow transducer signals
“Event history” of all warning alarms (up to 32 metrics)
User can pre-set engine rpm to maintain flow and head parameters when running unattended
Tracks oil and filter usage, and alerts operator when replacement is recommended
Diesel engine warm-up/cool-down cycle available
Remote Monitoring

QD Pipe & Fittings

High tensile strength hot-dipped galvanized steel
Quick disconnect (QD) coupling system
2" to 12" pipe, fittings, and adapters available

Tandem Connections

Connects two or more pumps in series for extra high-head operation
Available for Flygt 2000 or 2600 series BS version pumps
Allows hose and pipe connections

Trailers & Trolleys

3” pintle hitch (other options available)
DOT LED lights
Electric brakes
6-pin, round-pin trailer plug (other options available)
Fuel cell (for integral diesel driven pumps)

HDPE Piping

Strong, durable, flexible and lightweight
High performance and long life expectancy
Weather resistant

Genuine Parts

Dri-Prime Mechanical Seal Kit

Each kit contains viton/SS gaskets and o-rings
Will work with standard or SS/CD4MCu builds
For diesel or electric drive units

Dri-Prime diesel engine filter kit

Available for diesel engine pumps
Available for Tier 2, Tier 3, interim Tier 4 (iT4) and Final Tier 4 (FT4) engines
Each kit contains oil filter, fuel filter(s), air filter(s), and compressor filter (if applicable)
Kit contains all filters required for service

Dri-Prime 1-2 Years Spare Parts Kit

Available for Godwin Dri-Prime pumps
Kits provide cost savings over purchasing components individually
Kits include the most common wear parts needed for maintenance and repairs during the first 1-2 years of normal pump usage
Each kit includes Venturi jet and nozzle, compressor line, belt, O-rings, discharge ball/seat or flapper/gasket, inspection gaskets, and PDF drawing illustrating the location of each part