Godwin Heidra Series Godwin Heidra 150SG

Overview

Product Features

Hydraulic slurry gate for mixing capabilities prior to pumping
Liquid bath double mechanical seal for indefinite dry running
Gear motor connections with standard SAE flange & shaft
Open solids handling impellers with replaceable wear plates
Safe pump-end to minimize risk of electric shock or explosion

Hydraulic Submersible Pump With Slurry Gate

When the suction lift is greater 28 ft (8.5 m), Heidra® pumps take over where Dri-Prime® pumps leave off.

The Godwin Heidra 150SG hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6 in (100 mm) hydraulic pump-end. With variable speed capabilities, the Heidra 150SG can meet a variety of flow and head requirements up to 1,576 US GPM (430 m³/hr) and total dynamic head requirements up to 72 ft (22 m).

It has the ability to handle solids up to 2.6 in (65 mm) in diameter.

A remotely operated slurry gate allows the pump to act as a mixer, ideal for pumping thick, viscous, solids-laden sludges, such as those found in wastewater treatment plant (WWTP) digesters, environmental clean-ups and API separators at refineries.

Diesel or Electric Power Packs Available

Godwin Heidras come equipped with a diesel engine Power Packs for stand-alone operation, these pumps will work on any site, no matter how remote. Plus, all diesel engines meet the latest emissions regulations.

Our Heidra pumps can also be powered by electric motor Power Packs. Electric Power Packs do not need refueling, the motor requires less servicing, and they reduce the carbon footprint of any project. Available with soft starts and VFDs for variable speed control.

Options:

Diesel or electric drive
Skid mount or highway trailer
Quiet enclosures

Accessories

VFD

Optimize system performance
Increase efficiency
Automatic start and stop with switch, transducer and SCADA remote signal
Protects against over current and temperature
Protects against short circuit, under voltage and phase loss
Available for all electric driven Godwin Dri-Prime and Heidra pumps

Godwin PrimeGuard 2 Controller

State-of-the-art, touch sensing digital controller
Manual, automatic, or remote starting capabilities
Security levels allow limited to full access of controller functionality
Capable of auto-throttling engine rpm in response to changing pressure/level/flow transducer signals
“Event history” of all warning alarms (up to 32 metrics)
User can pre-set engine rpm to maintain flow and head parameters when running unattended
Tracks oil and filter usage, and alerts operator when replacement is recommended
Diesel engine warm-up/cool-down cycle available
Remote Monitoring

QD Pipe & Fittings

High tensile strength hot-dipped galvanized steel
Quick disconnect (QD) coupling system
2" to 12" pipe, fittings, and adapters available

Tandem Connections

Connects two or more pumps in series for extra high-head operation
Available for Flygt 2000 or 2600 series BS version pumps
Allows hose and pipe connections

Trailers & Trolleys

3” pintle hitch (other options available)
DOT LED lights
Electric brakes
6-pin, round-pin trailer plug (other options available)
Fuel cell (for integral diesel driven pumps)

HDPE Piping

Strong, durable, flexible and lightweight
High performance and long life expectancy
Weather resistant

Genuine Parts

Dri-Prime Mechanical Seal Kit

Each kit contains viton/SS gaskets and o-rings
Will work with standard or SS/CD4MCu builds
For diesel or electric drive units

Dri-Prime diesel engine filter kit

Available for diesel engine pumps
Available for Tier 2, Tier 3, interim Tier 4 (iT4) and Final Tier 4 (FT4) engines
Each kit contains oil filter, fuel filter(s), air filter(s), and compressor filter (if applicable)
Kit contains all filters required for service

Dri-Prime 1-2 Years Spare Parts Kit

Available for Godwin Dri-Prime pumps
Kits provide cost savings over purchasing components individually
Kits include the most common wear parts needed for maintenance and repairs during the first 1-2 years of normal pump usage
Each kit includes Venturi jet and nozzle, compressor line, belt, O-rings, discharge ball/seat or flapper/gasket, inspection gaskets, and PDF drawing illustrating the location of each part