Sr. Hardware Development Engineer

Engineering | Morrisville, NC (RTP), United States
Job Details Apply
Job Details

Xylem |ˈzīləm|

1) The tissue in plants that brings water upward from the roots;

2) a leading global water technology company.

Xylem, a leading global water technology company dedicated to solving the world’s most challenging water issues, is the leading global provider of efficient, innovative and sustainable water technologies improving the way water is used, managed, conserved and re-used. Our international team is unified in a common purpose: creating advanced technology and other trusted solutions to solve the world’s water challenges. We are committed to creating an organization of inclusion and diversity, where everyone feels involved, respected, valued and connected, and where everyone is free to bring their authentic selves and ideas.

If you are excited and passionate about helping us #letssolvewater, we want to hear from you!

The Role: Sensus, a Xylem brand, seeks to hire a Senior Metrology Hardware Development Engineer who will be part of a global team responsible for the design, development, verification and sustaining of a wide variety of products that are the responsibility of the Global Electrical Engineering Functional team.

The primary responsibilities for this position will be focused on static water meter technologies, ultrasonic metering technologies and electrical metering technologies as used in water, gas and electric meters.

The applications of these technologies are critical to the core products that make up a significant portion of Xylem’s meter based revenues.  This is an excellent opportunity to become a core team member involved in the innovation, definition, research and development of leading edge metrology products across multiple business segments within Xylem.

Essential Duties/Principal Responsibilities:

  • The Senior Metrology Hardware Development Engineer will be part of the Global Electrical Engineering Team consisting of dedicated and talented individuals responsible for the development, test and support of products comprising the Sensus water, gas and electric families. The team designs, tests and supports products that meet utility and industry requirements as well as internal requirements for reliability, performance, accuracy, and cost. As part of the Global Hardware team this person will:
  • Focus on the innovation, research, development and sustaining of metrology technologies and their applications within water, gas and electric metering products. This includes both magnetic metrology for water meters, ultrasonic metrology for water and gas meters and metrology technologies for electrical meters.
  • Provide technical knowledge and guidance to suppliers manufacturing custom critical components such as metrology ASICs and transducers.
  • Collaborate globally with similar experts located in different areas of Xylem across the globe. Lead the formation of small focused groups of experts for the various metering technologies and periodic collaborative engagements to ensure sharing of concepts, knowledge and innovative ideas.
  • Work on new product development efforts from concept through transition to high volume production. The product development life cycle includes analyzing requirements, developing concepts, performing feasibility studies, component selection, analog/digital/RF design, schematic capture, PCB layout, prototype builds and board bring-up activities, product verification testing, reliability and regulatory testing, establishment of manufacturing test plans and processes and transition of products to a high volume manufacturing facility
  • Develop/use tools and methods to analyze digital signals in the time and frequency domain, primarily on data originating from analog to digital conversions.
  • Products being developed include water/gas/electric metrology products, communication devices/communication products and installation/craftsperson tools.
  • Research available and emerging technologies to identify those that may be applicable for use in evolving the capabilities and offerings of new products.  Create proposals to enable detailed evaluation of said technologies and execute evaluations.
  • Work closely with the mechanical and firmware teams, making architectural decisions and design tradeoffs (between mechanical, electrical, firmware, and system software considerations) while ensuring the product will meet requirements.  Collaborate throughout the entire development cycle to ensure a product is delivered that meets all requirements. 
  • Establish and execute designer test plans to ensure the design is well centered, meets the product requirements and operates properly over all environmental conditions.
  • Design products to adhere to design for test and manufacturability guidelines.
  • Provide complete life cycle ownership of products, addressing post introduction field and factory issues as required.
  • Contribute to the continued development of processes and procedures in multiple areas.
  • Participation in Xylem Watermark volunteer activities

Minimum Qualifications: Education, Experience, Skills, Abilities, License/Certification:

  • Minimum B.S. degree in Electrical Engineering
  • 8 years+ of electrical hardware design experience
  • Expertise in at least two of the following technologies: Magnetic circuitry for metering applications, Ultrasonic circuitry for metering applications, Ultrasonic transducer familiarity, Electrical metering methods and circuit applications
  • Proven expertise in designing ultra small signal circuits and maintaining signal/noise ratios in an RF environment
  • Excellent analog design skills and experience, preferably in a high volume environment
  • Experience using schematic capture and PCB layout tools (Altium preferred), analog simulation (LT Spice or equivalent), typical lab tools such as oscilloscopes, spectrum analyzer, power supplies, multimeters, etc.
  • Ability to design, build and use test stations/methods to enable the proper evaluation of ultra small analog signals in the nV range.
  • Experience in performing digital signal analysis in both time and frequency domains.
  • Experience working with electrical circuit board communication protocols.
  • Experience with Design for Manufacturability (DFM) and Design For Test (DFT) practices
  • Excellent testing and troubleshooting skills
  • The ability and desire to work in a fast paced team environment, working with a cross functional team (e.g. electrical, firmware, mechanical and system test engineers) to create a fully functional system
  • The ability to evaluate and make recommendations on cost control, reliability and manufacturability issues while maintaining aggressive development schedules.
  • Work individually or as a team.
  • Excellent communications skills. Comfortable working with team members at all levels and across multiple disciplines.
  • Strong sense of ownership, willingness to engage across team boundaries to improve collaboration, solve challenges and overcome hurdles.
  • Apply specific concepts from different methodologies to produce the optimal results in the most efficient manner possible.
  • The ability and desire to work in a fast paced environment, engaging with a cross functional team (e.g. electrical, firmware, mechanical and system test engineers) to contribute to the development of a complex AMI/AMR system
  • Skilled in Microsoft tools such as Word, Excel..

Preferred Qualifications:

  • Keen understanding of manufacturing operations as related to printed circuit board assembly and mechanical assemblies related to metrology products.
  • Familiarity with transducer technologies and manufacturing/test methods.

We Offer You More Than Just “A Job”

  • Professional Development – To advance the capabilities of our people, we offer a wide variety of experiences to support our employees’ professional growth and continuous learning.
  • Total Rewards – We offer comprehensive programs for compensation, benefits, recognition, learning and development, work-life integration and corporate citizenship.
  • Watermark – Watermark is our corporate social responsibility program working to provide education and access to safe water to ensure healthy lives, gender equality, and resilient communities. Employees have the opportunity to learn and volunteer on various water-related projects.
  • Employee Networks – Our Employee Networks provide a professional, supportive network for employees from diverse backgrounds, including Women’s, LGBT+ and Allies, Veteran’s, People of Color and Allies, Hispanic Origin & Latin Affinity, Emerging Leaders, Working Parents Networks and Non-Native English Speakers and Allies.

Physical Demands/Work Environment:

(The physical demands and work environment described here are representative of those an employee encounters and must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.)

  • Regularly required to sit or stand, reach, bend and move about the facility
  • Ability to lift up to 40 pounds on an occasional basis
  • Some travel (< 10%) may be required
  • Office: Standard office equipment; work usually performed in an office or lab setting free from any disagreeable elements.
  • Standard weekly job hours: 40 hours

Xylem is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Apply Now
Apply